From LedHed's Wiki
Jump to: navigation, search
(Created page with "== Overview == I ran into some issues with NUT and my new Tripp Lite SMART1500LCDXL and wanted to post me notes so others can benefit. == Issue == MUT would post a wall messa...")
 
 
Line 1: Line 1:
 
== Overview ==
 
== Overview ==
 
I ran into some issues with NUT and my new Tripp Lite SMART1500LCDXL and wanted to post me notes so others can benefit.
 
I ran into some issues with NUT and my new Tripp Lite SMART1500LCDXL and wanted to post me notes so others can benefit.
 +
  
 
== Issue ==
 
== Issue ==

Latest revision as of 09:38, 14 April 2021

Overview

I ran into some issues with NUT and my new Tripp Lite SMART1500LCDXL and wanted to post me notes so others can benefit.


Issue

MUT would post a wall message stating that it lost connection with the UPS and then post that the data was stale.


Resolution

I initially set the pollinterval to 15 seconds, but started getting the disconnect issue. It turns out that the UPS likes to be polled by the driver every 1/2 second. NUT by default sets a 'pollinterval' of 2 seconds which seems to be frequent enough to prevent the disconnect. So I just commented out the pollinterval line in ups.conf, you could set it to a value of 1 but 2 seems to be enough.

ups.conf

[ups1]
        driver = "usbhid-ups"
        port = "auto"
        desc = "Tripp Lite SMART1500LCDXL"
        vendor = "Tripp Lite"
        vendorid = "09ae"
        productid = "2012"
#       pollinterval = 1
        bus = "001"


Reference

https://alioth-lists.debian.net/pipermail/nut-upsdev/2019-June/007440.html