From LedHed's Wiki
Revision as of 20:24, 12 April 2016 by Ledhed (Talk | contribs)

Jump to: navigation, search

Commands

Show Running Configuration

show Run
sh run


Enter the configuration terminal

config term
conf t


Configure VLAN 10

vlan 10


Set port 7 UnTagged on VLAN 1

vlan 10
untag 7


Get MAC Address on port 7

show mac-address 7

or 

show arp


Show MAC Table

show mac-address


Show Neighboring Devices

show lldp info remote

or 

show cdp neighbors


Save Running Configuration to Startup Config

write mem


Reference

http://blog.petrilopia.net/info/hp-procurve-cli-cheatsheet-2/

http://community.hpe.com/t5/ProCurve-ProVision-Based/Finding-IP-Addresses-of-Devices-Connected-to-5406zl-Switch-Ports/td-p/5905805

Retrieved from "http://wiki.ledhed.net/index.php?title=Procurve_Command_Reference&oldid=3318"