Procurve Command Reference

Commands

Show Running Configuration

show Run
sh run

Enter the configuration terminal

config term
conf t

Configure VLAN 10

vlan 10

Set port 7 UnTagged on VLAN 1

vlan 10
untag 7

Get MAC Address on port 7

show mac-address 7

or

show arp

Show MAC Table

show mac-address

Show Neighboring Devices

show lldp info remote

or

show cdp neighbors

Save Running Configuration to Startup Config

write mem

Reference

http://blog.petrilopia.net/info/hp-procurve-cli-cheatsheet-2/

http://community.hpe.com/t5/ProCurve-ProVision-Based/Finding-IP-Addresses-of-Devices-Connected-to-5406zl-Switch-Ports/td-p/5905805