AS/400 Change OUTQ IP Address

How to change the IP address of an AS/400 OUTQ

Overview

1) End the writer.
2) Vary off the device.
3) Change the IP address.
4) Vary the device back on.
5) Start the writer.

press [ESC] and run

WRKWTR

Select the writer you want to work with.
Choose option #4 to end the Writer. Press [F3] to exit.

press [ESC]

WRKCFGSTS *DEV *PRT

Select the device you want to vary off.
Choose option #2

While still in WRKCFGSTS choose option #8 to work with description.
Then choose #2 to 'Change'

Now Page down to the IP address and change it.
Press [F3] to exit.
Press [F3] to exit to "Work with Configuration Status" screen.

Select the device you want to vary on.
Choose option #1

press [ESC] and run

WRKWTR

Select the writer you want to work with.
Choose option #1 to Start the Writer. Press [F3] to exit.