From LedHed's Wiki
(Created page with "== iSCSI Initiator Settings == === Network Configuration === # Create a single vSwitch with the NICs you want to use for iSCSI and set them as "Unused Adapters" in the NIC Te...") |
(No difference)
|
Revision as of 08:19, 4 November 2012
Contents
iSCSI Initiator Settings
Network Configuration
- Create a single vSwitch with the NICs you want to use for iSCSI and set them as "Unused Adapters" in the NIC Teaming tab.
- Create a "vmkernel" for each NIC and override the Teaming Settings, moving only a single NIC to "Active Adapters".
Dynamic Discovery
DON'T USE IT!
At most use it to discover the IQN of your target then remove it.
Once you have the IQN create Static Discoveries.
Advanced Settings
Disk.UseDeviceReset = 0 Disk.UseLunReset = 1