Difference between revisions of "AS/400 Change OUTQ IP Address"

Revision as of 16:19, 24 June 2010

How to change the IP address of an AS/400 OUTQ

Overview

1) End the writer 2) Vary off the device 3) Change the IP address 4) Vary the device back on 5) Start the writer

Stop the Writer

press [ESC] and run

WRKWTR

Select the writer you want to work with.
Choose option #4 to end the Writer. Press [F3] to exit.

Vary off the device

press [ESC]

WRKCFGSTS *DEV *PRT

Select the device you want to vary off.
Choose option #2

Work with Description (Change the IP)

While still in WRKCFGSTS choose option #8 to work with description.
Then choose #2 to 'Change'

Now Page down to the IP address and change it.
Press [F3] to exit.
Press [F3] to exit to "Work with Configuration Status" screen.

Vary the device back on

Select the device you want to vary on.
Choose option #1

Start the Writer

press [ESC] and run

WRKWTR

Select the writer you want to work with.
Choose option #1 to Start the Writer. Press [F3] to exit.