From LedHed's Wiki
| Line 15: | Line 15: | ||
# Install the [https://github.com/matthewwall/weewx-interceptor weewx-interceptor driver] | # Install the [https://github.com/matthewwall/weewx-interceptor weewx-interceptor driver] | ||
# Configure WeeWX to use the 'Interceptor Driver' | # Configure WeeWX to use the 'Interceptor Driver' | ||
| + | # Edit '''/etc/weewx/weewx.conf''' and add the following: | ||
[Interceptor] | [Interceptor] | ||
driver = user.interceptor | driver = user.interceptor | ||
device_type = ecowitt-client | device_type = ecowitt-client | ||
| − | address = 10. | + | address = 10.0.0.10 |
port = 8080 | port = 8080 | ||
| − | + | ''Note: Enter your own IP and Port'' | |
Revision as of 06:37, 20 August 2020
Overview
The Ecowitt GW1000 is a weather gateway capable of receiving data from weather instruments via Radio Frequency and then rebroadcasts that data via IP.
WSView App
In order to configure the GW1000 you need to install the WSView app on a mobile device. Then put your mobile device on the same WiFi network as the GW1000.
Ecowitt Protocol
In the WSView app click 'More' in the upper right and click 'Weather Services' then next your way to 'Customized'. Enable the custom weather service, set the protocol to 'Ecowitt' and enter your server's IP & Port information. Save.
WeeWX Integration
- Install WeeWX
- Install the weewx-interceptor driver
- Configure WeeWX to use the 'Interceptor Driver'
- Edit /etc/weewx/weewx.conf and add the following:
[Interceptor]
driver = user.interceptor
device_type = ecowitt-client
address = 10.0.0.10
port = 8080
Note: Enter your own IP and Port
Reference
https://github.com/matthewwall/weewx-interceptor