From LedHed's Wiki
| Line 8: | Line 8: | ||
| − | == | + | == Backup Command == |
copy running-config tftp | copy running-config tftp | ||
| Line 15: | Line 15: | ||
| + | |||
| + | |||
| + | == Restore Command == | ||
| + | copy tftp: <FILENAME> | ||
| + | You will be prompted for your TFTP Server's IP address | ||
| + | Next you will be asked for the destination filename. (startup-config) | ||
== Reference == | == Reference == | ||
Revision as of 16:28, 18 March 2010
Prerequisites
You need a properly configured TFTP server.
Windows: TFTPD32
Linux: TFTP-HPA
FreeBSD: TFTP-HPA FreeBSD Port
Backup Command
copy running-config tftp
You will be prompted for your TFTP Server's IP address Next you will be asked for the destination filename.
Restore Command
copy tftp: <FILENAME>
You will be prompted for your TFTP Server's IP address Next you will be asked for the destination filename. (startup-config)
Reference
http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/products_tech_note09186a008020260d.shtml#tftp