From LedHed's Wiki
(Created page with "https://wiki.wemos.cc/products:d1:d1_mini_lite Category:Tasmota") |
|||
| (2 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
https://wiki.wemos.cc/products:d1:d1_mini_lite | https://wiki.wemos.cc/products:d1:d1_mini_lite | ||
| + | <br> | ||
| + | https://github.com/arendst/Sonoff-Tasmota/wiki/Wemos%20D1%20Mini | ||
| + | |||
| + | == Specs == | ||
| + | Chipset: ESP-8285<br> | ||
| + | CPU: 80MHz<br> | ||
| + | Flash: 1M<br> | ||
| + | USB/Serial: CH340<br> | ||
| + | Voltage: 3.3v<br> | ||
| + | |||
| + | |||
| + | == Arduino IDE Setup == | ||
| + | # Download and install the Arduino IDE | ||
| + | # Tools->Board->Board Manager | ||
| + | # Install ESP8266 | ||
| + | # Download Tasmota | ||
| + | # Copy the contents of the lib\ directory to %PROGRAMFILES(X86)%\libraries\ | ||
| + | # Copy the arduino\version 2.4.2\platform.txt %USERPROFILE%\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.4.2\ | ||
| + | # Launch the Arduino IDE | ||
| + | # Tools->Board->'LOLIN(WEMOS) D1 mini Lite' | ||
| + | # Open sonoff\sonoff.ino | ||
| + | # Go to the user_config.h | ||
| + | # Change WIFI_CONFIG_NO_SSID from WIFI_WPSCONFIG to WIFI_MANAGER (This step is optional, but causes the WEMOS to go into AP mode so you can connect to it with your phone and configure your WiFi settings) | ||
| + | # Save your changes [CTRL+S] of File->Save | ||
| + | # Upload the sketch [CTRL+U] or Sketch->Upload | ||
| + | |||
| + | |||
| + | == WiFi Setup == | ||
| + | Using a phone or laptop, connect to the ''sonoff-????'' SSID (where ???? happens to be the last 4 of the WEMOS MAC address). Then enter your WiFi network's SSID and Passphrase. Look up the IP assigned by your DCHP server (hint use those last 4 characters of sonoff-????). You can connect to the WEMOS by opening a browser and navigating to that IP. | ||
[[Category:Tasmota]] | [[Category:Tasmota]] | ||
Latest revision as of 20:34, 12 January 2019
https://wiki.wemos.cc/products:d1:d1_mini_lite
https://github.com/arendst/Sonoff-Tasmota/wiki/Wemos%20D1%20Mini
Specs
Chipset: ESP-8285
CPU: 80MHz
Flash: 1M
USB/Serial: CH340
Voltage: 3.3v
Arduino IDE Setup
- Download and install the Arduino IDE
- Tools->Board->Board Manager
- Install ESP8266
- Download Tasmota
- Copy the contents of the lib\ directory to %PROGRAMFILES(X86)%\libraries\
- Copy the arduino\version 2.4.2\platform.txt %USERPROFILE%\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.4.2\
- Launch the Arduino IDE
- Tools->Board->'LOLIN(WEMOS) D1 mini Lite'
- Open sonoff\sonoff.ino
- Go to the user_config.h
- Change WIFI_CONFIG_NO_SSID from WIFI_WPSCONFIG to WIFI_MANAGER (This step is optional, but causes the WEMOS to go into AP mode so you can connect to it with your phone and configure your WiFi settings)
- Save your changes [CTRL+S] of File->Save
- Upload the sketch [CTRL+U] or Sketch->Upload
WiFi Setup
Using a phone or laptop, connect to the sonoff-???? SSID (where ???? happens to be the last 4 of the WEMOS MAC address). Then enter your WiFi network's SSID and Passphrase. Look up the IP assigned by your DCHP server (hint use those last 4 characters of sonoff-????). You can connect to the WEMOS by opening a browser and navigating to that IP.