From LedHed's Wiki
(Created page with "== Commands == === Show Running Configuration === show Run sh run === Enter the configuration terminal === config term conf t === Configure VLAN 10 === vlan 10 ===...") |
|||
| Line 22: | Line 22: | ||
=== Get MAC Address on port 7 === | === Get MAC Address on port 7 === | ||
show mac-address 7 | show mac-address 7 | ||
| + | |||
| + | |||
| + | === Save Running Configuration to Startup Config === | ||
| + | write mem | ||
Revision as of 00:41, 25 February 2016
Contents
Commands
Show Running Configuration
show Run sh run
Enter the configuration terminal
config term conf t
Configure VLAN 10
vlan 10
Set port 7 UnTagged on VLAN 1
vlan 10 untag 7
Get MAC Address on port 7
show mac-address 7
Save Running Configuration to Startup Config
write mem
Reference
http://blog.petrilopia.net/info/hp-procurve-cli-cheatsheet-2/