From LedHed's Wiki
| (One intermediate revision by the same user not shown) | |||
| Line 20: | Line 20: | ||
copy tftp: <FILENAME> | copy tftp: <FILENAME> | ||
You will be prompted for your TFTP Server's IP address | You will be prompted for your TFTP Server's IP address | ||
| − | Next you will be asked for the destination filename. (startup-config) | + | Next you will be asked for the destination filename. (startup-config)<br> |
| + | or | ||
| + | copy tftp://192.168.150.10/my-confg system:running-config | ||
| + | |||
| + | |||
| + | |||
== Reference == | == Reference == | ||
Latest revision as of 22:29, 10 August 2012
Prerequisites
You need a properly configured TFTP server.
Windows: TFTPD32
Linux: TFTP-HPA
FreeBSD: TFTP-HPA FreeBSD Port
Backup Command
copy running-config tftp
You will be prompted for your TFTP Server's IP address Next you will be asked for the destination filename.
Restore Command
copy tftp: <FILENAME>
You will be prompted for your TFTP Server's IP address
Next you will be asked for the destination filename. (startup-config)
or
copy tftp://192.168.150.10/my-confg system:running-config
Reference
http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/products_tech_note09186a008020260d.shtml#tftp