From LedHed's Wiki
(Created page with "== Hard Reset Switch == Raspberry Pi B, B+ and 2 have P6/Run headers that can be used to reset the Pi or power it on from halt. == Soft Reset/Halt == You can also use GPIO...") |
(No difference)
|
Revision as of 08:28, 17 December 2015
Hard Reset Switch
Raspberry Pi B, B+ and 2 have P6/Run headers that can be used to reset the Pi or power it on from halt.
Soft Reset/Halt
You can also use GPIO Pin 5 & 6 along with some software that will monitor for a low state and then run a script.