From LedHed's Wiki
Jump to: navigation, search
(Created page with "== Commands == === Show Running Configuration === show Run sh run === Enter the configuration terminal === config term conf t === Configure VLAN 10 === vlan 10 ===...")
 
 
(4 intermediate revisions by the same user not shown)
Line 22: Line 22:
 
=== Get MAC Address on port 7 ===
 
=== Get MAC Address on port 7 ===
 
  show mac-address 7
 
  show mac-address 7
 +
or
 +
show arp
  
  
 +
=== Show MAC Table ===
 +
show mac-address
 +
 +
 +
=== Show Neighboring Devices ===
 +
show lldp info remote
 +
or
 +
show cdp neighbors
 +
 +
 +
=== Save Running Configuration to Startup Config ===
 +
write mem
 +
 +
 +
 +
== God Mode ==
 +
edomtset
 +
edomtset
 +
 +
This enables the diagnostic command set
  
  
 
== Reference ==
 
== Reference ==
 
http://blog.petrilopia.net/info/hp-procurve-cli-cheatsheet-2/
 
http://blog.petrilopia.net/info/hp-procurve-cli-cheatsheet-2/
 +
 +
http://evilrouters.net/2010/04/06/hidden-procurve-commands/
 +
 +
http://community.hpe.com/t5/ProCurve-ProVision-Based/Finding-IP-Addresses-of-Devices-Connected-to-5406zl-Switch-Ports/td-p/5905805
  
  
  
 
[[Category:HP_ProCurve]]
 
[[Category:HP_ProCurve]]

Latest revision as of 05:59, 12 May 2016

Commands

Show Running Configuration

show Run
sh run


Enter the configuration terminal

config term
conf t


Configure VLAN 10

vlan 10


Set port 7 UnTagged on VLAN 1

vlan 10
untag 7


Get MAC Address on port 7

show mac-address 7

or

show arp


Show MAC Table

show mac-address


Show Neighboring Devices

show lldp info remote

or

show cdp neighbors


Save Running Configuration to Startup Config

write mem


God Mode

edomtset
edomtset

This enables the diagnostic command set


Reference

http://blog.petrilopia.net/info/hp-procurve-cli-cheatsheet-2/

http://evilrouters.net/2010/04/06/hidden-procurve-commands/

http://community.hpe.com/t5/ProCurve-ProVision-Based/Finding-IP-Addresses-of-Devices-Connected-to-5406zl-Switch-Ports/td-p/5905805